![How to Sell on eBay and Make Money: Complete Beginner's Guide [2026]](https://static.tildacdn.net/tild3335-6137-4361-b864-613035633963/_12.png "How to Sell on eBay and Make Money: Complete Beginner's Guide [2026]")
★★★★★ 4
Great filter, but doesn't fit 2013 Honda Fit without modification
Size: 8.3" x 9.3" x 1.3"
Right off the bat: I don't have any airflow problems with this filter. It works great, the air is noticeably cleaner, and airflow has not been meaningfully reduced. However, it doesn't fit my air filter holder very well.
The ' air filter holder' (a plastic tray that slides horizontally into the air flow system) has two plastic fringes on either side of the tray, which each have two small notches in them, a few inches apart from one another. This appears to act as a sort of 'key' by which you can gauge you are putting the filter in with the correct alignment. On an OEM filter, the slots line up with two strips of material that stretch across the length of the filter, which themselves rest within the slots. However, the slots don't line up with the strips on this filter. I had to cut the fringes so that the slots in them are wider, so the strips would fit in them. Without doing this, the filter wouldn't press down into the tray.
Having done that, and the filter now rests flush in the tray, there are still marginal gaps around the perimeter of the filter. It's a millimeter or two too small for the tray, so there is some airflow around the filter. This could be rectified by wrapping insulation tape or something around the edge of the filter, or could be ignored if you're not super picky. I haven't added any wrapping to get an airtight seal, and even with that gap I still noticed that the air is way better.
So ultimately, it didn't fit exactly, but it fits 90% of the way and, with some finagling, is a superior filter by any other measure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2018
